Accu-Chek Softclix Bedienungsanleitung PDF herunterladen (Seite 60)

116

Symbols, display messages and troubleshooting

117

Symbols, display messages and troubleshooting

9

Symbol... Meaning:

You are requested to run a quality

control test.

This result is/was a quality control result.

The temperature during testing was at

the limit of the permitted range (between

+6 °C − +10 °C or between +40 °C

− +44 °C).

Do not use the result of this test as a

basis for therapeutic decisions.

 Turn the meter off. Let the meter

warm up or cool down slowly. Turn

the meter on again and repeat the

test.

During testing the permitted tem-

perature range is from +10 °C to

+40 °C.

Symbol... Meaning:

When this result was saved, the tem-

perature was at the limit of the permit-

ted range.

Do not use the result of this test as a

basis for therapeutic decisions.

The batteries are running low. When

the battery symbol first appears in the

display, you can perform about 50 more

tests. Continue testing until all the test

strips in the test strip drum have been

used. Then replace the batteries and the

test strip drum.

If you use NiMH rechargeable batter-

ies instead of normal batteries, fewer

than 50 more tests can be performed. If

the rechargeable batteries are old and

exhausted, it may not be possible to per-

form even one more test.

When the batteries are so low that

no more tests can be performed, the

battery symbol appears briefly for 3

seconds in the display. Then the meter

turns off. Insert two batteries (new or

recharged).

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 81 82

Kommentare zu diesen Handbüchern

Keine Kommentare