Accu-Chek Softclix Bedienungsanleitung PDF herunterladen (Seite 64)

124

Symbols, display messages and troubleshooting

125

Symbols, display messages and troubleshooting

9

This message/symbol

appears…

and means:

The test strip drum in the meter is

empty.

Insert a new test strip drum.

 You inserted a partly used test strip

drum.

 You opened the drum compartment.

 You took longer than two minutes

to replace the batteries (the year,

date and time settings are lost) and

a partly used drum remained in the

meter.

 You adopted the bar code from the

preceding drum, as the bar code on

the drum that is inserted is damaged

(see error message E-2 on p. 130).



This message/symbol

appears…

and means:

 (cont.) You are requested to perform a quality

control check in order to check the test

strips. The meter has no way of telling

when the drum was first inserted or how

long the partly used drum has already

been in the meter. Perform a quality con-

trol check (see Chapter 6, “Checking the

Accu-Chek Compact Plus meter”). If the

measurement produces a correct result,

you may continue to use the test strips.

If the result is incorrect, you need to

insert a new drum. Following the quality

control check, the bottle symbol disap-

pears from the display. The drum symbol

continues to flash in order to draw at-

tention to the fact that the meter cannot

calculate the use-by period. The symbol

only disappears when you insert a new

drum. All results are saved along with a

flashing drum symbol. If you do not per-

form a quality control check, the flashing

bottle symbol appears with every test

until you insert a new drum.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 81 82

Kommentare zu diesen Handbüchern

Keine Kommentare